Dataman 48XP User Manual download pdf (Page 24)

hardware ID and compares it to the library then display the

possible chip in the window.

This Auto ID is only available for 32 pin or 28 pin EPROM

and Flash memory chips, it can not be applied to MCU, PLD or

other serial PROM, EPROM/Flash. Chips with over 40 pins do

not have this function since the A9 location is not standardized

for chips over 40 pins, using such a function may damage the

chip since a 12V high voltage is applied to the chip which can

cause damage to the chip by accident.

Mass-production Mode

Menu Device / Mass Produce

The DATAMAN-48XP can be used as a mass-production

programmer for manufacturing. When in mass production

mode, all keyboard and mouse functions are disabled. The

operator needs only to insert the chip into the ZIF socket, wait

until the green LED next to the socket flashes, remove the

programmed chip and insert a new chip. Anyone can do the job

without special training or skills. Since all keyboard and mouse

functions are disabled, the possibility of errors being caused by

pressing the wrong keys or changing the buffer′s contents are

eliminated.

In mass production mode, the DATAMAN-48XP first performs

an insertion test and an ID check on a newly inserted chip. It

then automatically programs the chip.

Note: The insertion test must be enabled in operation option

set up in mass-production mode to ensure yield rate of

programming.

Necessary set up in mass production mode.

After entering mass production mode a series of screens will

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

No comments

Dataman 48XP User Manual Page 24